Repeat MK3 Drive - 3mm
Repeat MK3 Drive - 3mm
Regular price
$40.00
Regular price
Sale price
$40.00
Unit price
/
per
Description
Improvements:
- 1104 was changed to a 1204 brushless motor for more power
- Increased kv to 3500 and increased gear ratio to 28.5:1 to keep speed consistent but increase power
- Motor shaft was extended so you can cut to length to improve versatility
- Output shaft is made from hardened 4130 steel, to improve lifetime and is integrated into the carrier plate, to improve durability.
- Output shaft is retained without the use of a circlip, eliminating the main failure mode and improving the durability
- Improved motor wire gauge and attachment method to make it more durable than ever.
- Gearbox baseplate is integrated into the brushless motor base, removing screws and additional points of failure.
Features:
- 1204 3500kv custom brushless motor
- 2s-4s rated voltage
- 16mm, 28.5:1 all metal planetary gearbox
- 3mm or 4mm “D” extra long output shaft (can be cut to length)
- ~23g weight with 3mm shaft (can lower the weight by cutting down the shaft and shortening the wires)
- ~24g weight with 4mm shaft (can lower the weight by cutting down the shaft and shortening the wires)
- 10.5mm M2 Face mount hole pattern
- Comes with Repeat Inside sticker sheet (one per order while supplies last)
- Comes ready for combat, just solder the motor leads to a brushless ESC and you’re on your way (Soldering iron required)
Speed
~909 rpm @ 2S (7.4V)
~1363 rpm @ 3S (11.1V)
~1817 rpm @ 4S (14.8V)
CAD model here:
Disclaimers:
The wires on these motors can break if tugged directly. Adding a bit of hot glue near the entrance helps. Do not handle the motors by the wires and take care when stripping the wires.
These gearboxes can only accept ~2mm of face screw engagement. Using screws that are too long will result in damage.
The wires on these motors can break if tugged directly. Adding a bit of hot glue near the entrance helps. Do not handle the motors by the wires and take care when stripping the wires.
These gearboxes can only accept ~2mm of face screw engagement. Using screws that are too long will result in damage.
These motors are being used in combat, where anything might happen. I am unable to accept returns for battle damaged products.
Share
Collapsible content
Specs
Improvements:
- 1104 was changed to a 1204 brushless motor for more power
- Increased kv to 3500 and increased gear ratio to 28.5:1 to keep speed consistent but increase power
- Motor shaft was extended so you can cut to length to improve versatility
- Output shaft is made from hardened 4130 steel, to improve lifetime and is integrated into the carrier plate, to improve durability.
- Output shaft is retained without the use of a circlip, eliminating the main failure mode and improving the durability
- Improved motor wire gauge and attachment method to make it more durable than ever.
- Gearbox baseplate is integrated into the brushless motor base, removing screws and additional points of failure.
Features:
- 1204 3500kv custom brushless motor
- 2s-4s rated voltage
- 16mm, 28.5:1 all metal planetary gearbox
- 3mm “D” extra long output shaft (can be cut to length)
- ~23g weight (can lower the weight by cutting down the shaft and shortening the wires)
- 10.5mm M2 Face mount hole pattern
- Comes with Repeat Inside sticker sheet (one per order while supplies last)
- Comes ready for combat, just solder the motor leads to a brushless ESC and you’re on your way (Soldering iron required)